Please note: This supplier will be closed on 11/24, 11/25, 12/26 for the holidays. The shipping cut off is UPS's cut off of 12/15 to try and have the products delivered by Christmas. Note: Please check your state regulations, hunting regulations, etc before placing an order with this supplier. Your order may be canceled if the item is not able to be shipped to your state due to their regulations.
Product Review
Product Description
Burris Xtreme Tactical Ring 30mm High Matte 2 Piece 420164 Please note: This supplier will be closed on 11/24, 11/25, 12/26 for the holidays. The shipping cut off is UPS's cut off of 12/15 to try and have the products delivered by Christmas. Note: Please check your state regulations, hunting regulations, etc before placing an order with this supplier. Your order may be canceled if the item is not able to be shipped to your state due to their regulations.
I bought these to mount up a Millet TRS-1 scope to my .300 Winchester Magnum. These are beefy and I wanted to make sure everything was going to stay put. I did buy the high rings because I have a full contour barrel and the scope has a 50mm objective lens, but I could have gotten away with the mediums I believe. So keep that in mind. The lower the scope the better.
If weight is an issue for you, I wouldn't get these just because every little bit counts. But if you don't mind a little extra weight these are great. They take a bit to get on and off just because of the extra screws, but you are guaranteed a snug fit.
They lock onto my EGW 20 MOA base perfectly with no play, and are very easy to get on and off. Even if I don't tighten them with a wrench they don't have any play, but I think they will back off as the gun is shot so make sure to tighten them down. I keep a small 1/2 inch box wrench with me just in case I need to remove them.